SAFECOUNTYWORKER INC.  

                                      3170 57th Avenue Circle East, Bradenton FL 34203

Phone (941) 920-7862 safecountyworker@gmail.com    

SCW INC Mission Statement:

Safe County Worker will always strive to Provide the most Accurate and Directly Work-Related Training Topics to your Company or Municipal Agency.

SCW INC Instructors are all keenly Knowledgeable of their Individual Topics with Formal Training / Degrees or 16 Topic Years OTJ.

Actual work experience with Hands on Knowledge of Safety Training Topics is required to instruct any SCW INC Training Programs.

Programs provided are SCW INC or State of Florida Programs *Provided by SCW INC with State Approved Instructors. Consistency*

Information is *Up Dated as Posted by OSHA, FDOT, EPA, DEP, AWWA, FWPA or any Government Agency applicable to the Program.

SCW INC sends Notifications of Major Policy-Procedure Changes, as they pertain to past Training. Then we add it to the Program(s)

   NEW PROGRAM AVAILABLE 2024 - FDEP FSESCI 

           FLORIDA STORMWATER EROSION & SEDIMENTATION CONTROL INSPECTOR

                                                    SCW & TBT - FSESCI 2024

            TIER 1 & TIER II - FDEP CERTIFICATION 

This is a 16-hour FDEP Certification course provided by

  SAFECOUNTYWORKER INC. WORKFORCE INITIATIVE & TAMPA BAY TRAINING

Available on-Site Client Location or Announced Reserved Location

                   This program is provided to both Public and Private Agencies

                                                 Location:  

            SAFECOUNTYWORKER INC. 

                     @ HOST AGENCY

                                                      7:00am- 3:30pm

For registrations / group pricing / scheduling or additional information

           Contact: Darrell Oliver (941) 920-7862   safecountyworker@gmail.com

          SCW MOBILE TRAINING PROGRAMS

           SAFECOUNTYWORKER INC.

            WORKFORCE INITIATIVE- SAFETY TRAINING PROGRAMS - 2025 Course Listing

    FLORIDA STORMWATER EROSION & SEDIMENTATION CONTROL            

                        INSPECTOR TRAINING PROGRAM

       Florida Stormwater Erosion and Sedimentation Control Inspectors Manual

          Florida Department of Environmental Protection Agency Certification

 The Florida Stormwater Erosion and Sedimentation Control Inspectors Manual is divided into

  two tiers that focus on Best Management Practice (BMP) Installers (Tier I) and Qualified BMP

 Inspectors (Tier II). The classes follow the curriculum provided in the Tier I and Tier II manuals -  in sequence, and will help individuals improve their knowledge of how to properly manage the impacts from suspended solids, turbidity, nutrients (i.e., nitrogen and phosphorus), and other surface water contaminants.

 The Tier I manual and class covers Chapters 1 through 5 Tier I *Providing an introduction to

 stormwater, erosion, and sedimentation control, and teaches BMP installers and operators how to properly select, install, and maintain BMPs. This class is a prerequisite to the Tier II class.

The Tier II manual and class covers Chapters 6 through 9 Tier II Providing additional details on information introduced in the Tier I manual along with the applicable regulations, inspection forms, and enforcement procedures necessary for the proper inspection of BMPs.

BMP Installers or Operators should maintain a copy of the Tier I manual for reference. Qualified BMP Inspectors should maintain a copy of both the Tier I and Tier II manuals for reference.        

SCW – FSESCI Manuals - Tier I & II are a Combined – 1 Bound – Protective Cover Manual

                                                    Target Audience

                              BMP Installers / Operators / Qualified BMP Inspectors 

    *USING the FDEP Tier I and Tier II manuals for Training and Future Reference 

                                             *Will have a Bound Manual to Keep  

                              Certificates and Wallet Cards (if applicable):

                              Issued from the Florida Environmental Protection Agency              

Individual Seat Cost:

$279 Government Public Agency Personnel or Host Agency

$299 Government Public Agency *Contracted Support Personnel - Guest

$329 Private Company / Agency Personnel 

Course Length 16 hours

        SAFECOUNTYWORKER INC.

SCW INC - NEW EMPLOYEE TRAINING

*New Employee – Introduction to OSHA - $119.00 Per-Student Per-Day Guest Seat / Group Day Rate $1250.00 No Max. 

> Orientation: 7.5 Hour – 15.0 Hour

> BBP: Blood Bourne Pathogens – First Aid- Emergency Procedures – Accident Protocols –Respiratory – EMS- Fire – Rescue –Records

> PPE: Personal Protective Equipment 7.5 Hour

Head –Neck-Face-Eyes-Hearing-Hands-Feet-Legs-Lungs-Full Body Protection- Fall Arrest Systems-Ladder Safety-Lightning-Hand Tools

> HAZZ: Hazardous Materials – Hazardous Communication’s (Global Harmonizing System GHS) – Safety Data Sheets (MSDS Sheets)

> DDMR: Defensive Driving Municipal Routes 7.5 Hour

Mapping of Safe Routes – Traffic - Distractions – Height / Weight Restrictions – Loading Zones – Proper Speed /Braking Distances Construction Zones – Residential Neighborhoods – Over Hangs – Weight Limitations / Stations – Vehicle Fueling and Inspections

Florida Department of Transportation FDOT Temporary Traffic Control:  Seat Cost*

Advanced TTC -20 Hr. $399 - Refresher 8 Hr. $229 - 4 Year Certifications

Intermediate TTC 16 Hr. $279 - Refresher 8 Hr. $199 - 4 Year FDOT Certifications

Advanced Flagger 8 Hr. $1190 Group 18 max  

Basic Flagger 4 Hr. $950 Group Day Rate *2 Groups - *2-4 Hr. Programs 12+

SCW INC is an *Approved Provider for the State of Florida DOT Temporary Traffic Control Programs - Provider # 212

First Link is to the MOT Administrator Website - Intermediate Course Listings Links are Below 

https://www.motadmin.com/find-a-training-provider.aspx?pageNum=5&orderBy=TwoDecimalRating&pageNum=5&orderBy=TwoDecimalRating

file:///C:/Users/tayor/Desktop/2022%20ITTC%20Listing.pdf

file:///C:/Users/tayor/Desktop/2022%20ITTC-R%20Listing.pdf

Commercial Motor Vehicle Training – Class A – B or C Training CDL 2025

Florida Commercial Driver’s License *Coaching the State Exam ** 1-2 Day Program is available – 10 minimum

2 Day Program can be used for Employees who have not obtained their Permits *Day 1 – No Permits *Classroom $199 per.

1 Day Program (or Day 2 -2 Day program) Program is for Students who Poses their Applicable Permit *Vehicle is Req. $199 per.

Though we cannot Guaranteed a Passing Score at the State Exam *since 2018 we have had a 96% first time Pass Rate.

*Not Included: Testing Agency-DMV Fees - Medical Cards (Gov Exempt) -Training Vehicles -Training Area. 

Vehicles > Tractor Trailer Rig - LOW BOY – Dump Truck - Fleet - Service - Support - Emergency – Sanitation – Fueling

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

SCW INC - OSHA 29 CFR TRAINING – Classroom Topics Only

Cost Per-Student Per-Day - $119 Guest Seat or Group Day Rate $1190 * 24 Maximum Students

Classroom Only Programs - Specific Topics 7.5 Training Hours 70% + Test Score Required for Certificate COC

LOTO * Lock Out Tag Out 29 CFR 1910.147 - Control of Hazardous Energy

*With a Current PRCSE Card – The 4 Hour Program is available in *2 Groups- 2 Sessions Per-Day *Day Rate Only

Certificate of Completion in keeping with Current OSHA 29 CFR 1910.147 the Control of Hazardous Energy General (Lock out /Tag out) Electrical and Chemical Systems Maintenance Safety – Plant Mechanic or Plant Operator Level (Including Lock-out/Tag-out, Energized Systems, General Protective Procedures and Gear and Arc Flash Prevention)

EXCTS *Excavation Trenching and Shoring 29 CFR 1926.650-P

Introduction: Overview of General Excavating Safety Issues, Typical Municipal Excavation Scenarios and Specific Municipal Excavating Hazards, Actions called for under OSHA 29 CFR 1926 Subpart P, implementing a City Wide “OSHA Compliance” Plan and Inventory of Necessary Equipment, Work Zone Hazardous Analysis, Job set-up and Mobile Equipment Safety, Protection from Cave-ins, Protection from Other Excavating Risks, Locating and Protecting Underground Utilities. Excavation Daily Checklist, Virtual Excavation Exercise and Excavation Emergencies & Testing

PRCSE *Permit Required Confined Space Entry 29 CFR 1910.146

> General CS Hazards, Identifying Types of CS’s, IDLH, Typical Municipal Exposures, Trenches and Excavations

> Actions called for 29 CFR 1910.146, LOTO, Atmospheric Monitoring, Positive Ventilation, Fall Arrest, Retrieval Systems

Communications, City Wide Plan, Identification,            Labeling, Mapping, Specific Site Analysis, Manuals, Facility Equipment

Fire Extinguisher(s), Ventilator-Blower(s), Wheel Chocks, Tripod or Davit, Harness, Air Quality Monitor, First Aid Kit, Grounding Cables, Phones/Radios, CPR, BB Path, Mask, Aux Power, Pulleys, Block, Tackle, Chain, Cones, Barricades

Wheel Chalks, Sign Board, Caution Tape, Lighting, Cloth Bucket & line, Orange Plastic Fencing, PPE, SCBA Heat Stress

>Personnel: Entrant-Attendee-Entry Supervisor, Permit Process, Records Keeping, General briefing, First Gas Det.

Read O2______LEL_____H2S_____CO______, Worksite engineering, Arrange PPE, Communication Check, Load Test        

Municipal Lead Worker Service Manual, Additional Permits, Final Hazard Identification, Loss Control Checklist, Signature

SCWBE *Basic Electricity 29 CFR 1910.331- .335 Subpart S Electrical Installation

SCWBW *Basic Wiring 29 CFR 1910.331- .335 Subpart S Electrical Installation

Introduction to Electricity / Electrical Systems / Basic Electrical Wiring Fundamentals, Top 5 Tips for Electrical Wiring

COC > *Certificate of Completion, is Issued upon the Students Classroom Participation and General Knowledge of the Material covered in Program Classroom and/or Field Training. The required Testing of Provided Classroom Information for COC.

Information Covered in the Program, and the Basic Understanding of same Material *Tested

70%+ Required Test Score for COC *Students Receive a Test / Scores are MTC Proctored

Class ** By Design will Alert “all Students” to the Dangers known to the Professional Electrical Providers Community, and to the Electrical General Contractors. Program Syllabus is available upon request. Additional Material Covered in Classroom:

City and county 2013-2016 accident case studies. OSHA 29 CFR 1910.331- .335 Subparts S Electrical Installation Basic Components

Protection: Personal Protective Equipment / PPE Electrical / Proper Fit / Proper Tools

Preparation: Equipment / Tool Checklist / LOTO required yes-no / Support Equipment 

Placement Decisions: Internal / External Work Zone Hazard Analysis: Emergencies and Rescue: Who do YOU Call in a Rescue Emergency Situations - Fall Recovery – Self Rescue – Emergency Rescue - Ground Rescue – Aerial Rescue= Public Safety Rescue

OSHA 10 Hour Construction or General Industries ** Only Available in > 2 – 5.0 Hour Days ** OSHA Wallet Cert Included

OSHA 30 Hour Construction or General Industries ** Only Available in > 4 – 7.5 Hour Days ** OSHA Wallet Card Included

SCW INC LIGHT EQUIPMENT SAFE OPERATOR OSHA CFR TRAINING

Group Day Rate $1250 * 18 Max. Students

Client *Provided Equipment   7.5 Contact Training Hours  >   1/2 Day Classroom - 1/2 Day Field Exercise

Classroom - Field Proficiency Combined Average Score of 80% + for SCW Safe Operator Certificate. Neither below 70%

TWSW *Tree Work Safety Workshop *In keeping with OSHA Current Federal Regulations CFR

Classroom: Accident Case Studies- Personal Protective Equipment and Clothing- Chain Saws chaps- gloves- hard hats- shoes- eye wear and other protective gear. Chain Saw Safety- safe work practices- the right saw- maintenance- proper use- avoiding kick-backs, trouble shooting and stowing- Bucket Trucks, Aerial Baskets, EWPs- positioning, stability and limitations- Tree Trimming- Felling- Liming- Bucking- Pre-Cuts- Hazard Assessment- Felling plans and log sectioning for removal.                

Wood Chippers:  Safe positioning, limb sizing, insertion direction and danger zones, related to chipping machines.

Power Line Issues:  High Voltage Risk- Covered Wires- proximity Risk- Downing Power Lines by felling trees or limbs. 

Heat stress, lightning, poisonous plants, insects, bees and many other hazards incidental to tree work are presented.  

Field Exercise: *All Field Exercise Material is covered in class prior to exercise. The Field Exercise is Safe Chain Saw -Chipper Operations. Hazard Assessment, Power lines, Rotted limbs, Rotted trunks, Insects, Snakes, Objects at risk, Personnel, fall zone-2 Saw Inspection, Guards, Fuel, Oil, Dirt/dust/Chips buildup, Chain tightness, Chain brake, Tip “kickback” Guard, Chord- 3 Starting Saw, saw on ground- switch on, Choke (y/n), Foot in handle, Stable full range pull, quickly starts- Saw Handling, Position, Stance, Grip, and Extending, lean limit, Up-hill out of fall-roll zone, pinch points, carrying- Attack, near saw body, no upper tip uses, Upper blade use, Grip-grab, tooth use, Forcing, bending- Pre-cuts, Face cut, Hinge wood, Bore, Back strap, Tie Offs, Degree of, Joining Cuts, Tension Cuts vs Compression Cuts

BT-SO *Bucket Truck Safe Operator 

OSHA 29 CFR 1910.67-.269-.268 and 1926.952

Introduction: Why bucket truck operator Safety certification? City and county 2013-2016 bucket truck accident case studies. When a bucket trucks is viable tool -Bucket Truck Features and Components: Basic Components- Boom Actuation Power Systems-Boom/Bucket Controls/Control Overrides-Fall Protection and Fall Arrest Systems- Personal Protective Equipment-Proper Fit-Basic Boom/Bucket Operations: Preparing Vehicle for Arial Operations- Engagement of Stabilizers- Removal of Travel Locks-Bucket Entry-Vehicle Placement Decisions: Stable Surface Areas- Over Head Hazards -Lane Closures -Tight Spaces -External Work Zone Hazard Analysis: Temporary Traffic Control – Vehicular advanced warning- cones- barricades- arrow boards- flagmen- vehicle placement- vest, etcetera. General Work Zone Perimeters- Stakes- Caution Tape- Fencing plastic or other- Vehicle barriers – etcetera.

Pedestrian Traffic Control -Over Head Utilities-Internal Work Zone Hazard Analysis: Pedestrian Worker and Mobile Equipment Conflict Avoidance -Internal Work Zone Perimeters Objects, Inclines, drop-offs, excavations, special risk/hazard areas -Other Vehicle Operations -Safe Distances, Backing, Securing Vehicles, Chocks, Weather - Lightning, Hi Winds, Rain, Street –Lightning and Temporary Traffic Control Devices *Lock Out / Tag Out -Tree Work Safe Operations- Crain Saws “While aloft” Liming and Felling -Trees and Power Lines - OSHA Rules- Emergencies and Rescue: Fall Recovery – Self Rescue -Ground Rescue - Public Safety Rescue - Written Test – Classroom- Field Exercises and Proficiency Testing

EWP-SO *Elevated Work Platforms OSHA 29 CFR 

** See BTSO above > Same CFR > Elevated Work Platforms

PILT-SO *Powered Industrial Lift Trucks OSHA 29 CFR 

– Forklift Training SCW INC O29CFR COC Certification 

Classroom: General safety requirements relating to the use of forklifts including a recent history of serious forklift accidents and accident statistics provided by the U. S. Department of Labor. OSHA Forklift Standard- actual accidents, all emphasizing the importance of completing forklift training and continuing to adhere to safe work operator practices. Preparing Your Facilities for Safe Forklift Operations- warning signs, speed limits, use of fish-eye mirrors, over-head clearance warning bars, floor and pavement markings, dock boards, corner guards, adequate lighting, clear isles, orderly stacking, housekeeping- Preferred Designs, Important Features and Accessories and Pre-operation Inspection- types of lift trucks. Class 1 – 7, different motors/engines, tires, widths and terrain capabilities- finishing with preparations for operation prior to use, including pre-use inspection- Safe Operation

               Field Exercise (Hands-on) Proficiency Required

         >> All Heavy Equipment Operations Training Courses << 

       Host Agency Employees Only unless pre-approved by Host

HEO -3 Heavy Equipment Safe Operator in Keeping with applicable OSHA Standards

Excavation Equipment Training > EXCTS *is required for Excavation Equipment Safe Operator Certificates

** Any Combination of 3 Machines – 1 Day Classroom – 1 Day Field Exercise - Group Day Rate $1250 * 12 Max. Students

_

In keeping with OSHA CFR Heavy Equipment Operations *Imperative Operator Rules *Work Zone Proximity to Workers

Tip Overs / Roll Overs / Power Lines / Locates / Inspections / Proper Operation / Safety Equipment / Manuals / Rules

HEOSO- Heavy Equipment Operations Safe Operator COC **Any Combination of 3 Machines PER DAY

Excavator Crawler- Mini Excavator – Backhoe - Front Loader – Backhoe Loader – Skid Steer - Grade All – Motor Grader Bulldozer - Grapple Truck – Vacuum Truck – Commercial Dump Truck - Other

The Following PWD / UTD TECH Programs are Mobile Video Trainings Only

Field Training is provided by the Client Internally after Training

Total Program is 6 Days - Available to your Schedule - Annually-Biannually or Quarterly

Public Works / Utilities Maintenance Technician

Topics can be Added - Removed - Expanded - Condensed to Your Particular Needs